GUIDANCE FOR NEW EXTENDER SETUP Setup - Are you facing trouble logging into the router setup website?

Are you looking for an IP setup page and wants to know about ways to setup Router via IP setup page?


Then you are at the right place!


In this article you will find all the solutions to setup and login for your router.


Let’s know about:

What is is an IP address used by routers for specific ways to identify themselves on the network. is a specific IP address that is assigned by some router manufacturers as the default IP address in the hardware settings of their devices. This IP address allows the user to access the internal settings of the router or modem. It is one of the addresses in the "16-bit private network block address space" reserved for use in private networks.
A typical home or small business network uses only a subset of it, which stores for most routing networks. is reserved for transmitting broadcast data (sending data to all computers on the network).

What is

Therefore, is the last address that can be used in the range. is not available and is also reserved for specifying the network. IP Address Login


if your router uses as its IP address,

you still have 253 addresses for use.

In general, when you receive a new router or modem, you provide a user name and password. This username and password will protect you from unnecessary connections.

To connect to your router,

go to

If this IP address does not work,

your router will use a different address that you can search using our router's IP search guides for Windows, Android, Mac OS, Linux and iOS.


Read about:

How to Login in 5 easy steps:


you find it difficult to login, you may get help from our expert by calling them on our toll free number or you can get chat services from our experts.


Look at:

How to Connect to your router using

Go to to interact with your key.

If this does not work,

your IP adapter has an alternative location that you can open by visiting the router's IP address check page.

If there is a page, such as search results or other error,

it may mean that your router is not connected to or the computer cannot see the router.

Connect router using

So, the best way is to get in touch with our expert team to get help to connect your router. Username Password

What should you do if you forget your IP address and username?

When you purchase a new router or modem, you will receive a user name and password to log on to. However, if it is changed by a user or you forget your username or password, you will need to reset your router to the factory default settings.



that if you reset your router,

it will be the factory default settings and you will lose all your settings.

Now, Look at the steps:

  • Step 1: You must first turn off the router.
  • Step 2: Now you need to press and hold the reset button on the rear panel, but you need a tapered pin, needle or compass, and then turn on the router. However, do not release the reset button and hold it for 5 to 10 seconds after turning on your router.
  • Step 3: Now you can release the button and wait for the device to restart.
  • Step 4: You can now connect your computer to your router through a network cable or using a Wi-Fi connection.

Note some important points:

  • Always ensure that the router is turned on before restarting it completely.
  • Try using your default IP address and enter your default username and password as "Administrator".
  • Make sure your computer's IP address is in the same subnet as your router; this means that the subnet mask should be and the default gateway must be the same as your router's IP address.

Look at: important points

How to find the default IP gateway for the router?

If typing in the browser address bar causes a time-out error, your router may be using another default IP address. On Windows, you can find the correct IP address by running Command Prompt; From there, type "ipconfig" and press "Enter". The IP address of your router will be displayed next to the words "Virtual Door". If the IP address displayed is wrong, note it and instead type it in the address bar of your browser.

It is easy to find your router's default IP address in Windows:

This is the IP address of your router.


If you are not using a Windows device and cannot run a Command Prompt,

you can try entering one of the other public default IP Gateway addresses that are typically assigned to routers on private or home networks.

Some of the best options you should try (except,, and


Look at the:

Common router IP address mistypes:

If you cannot load the router login page, you may have entered a wrong IP address or entered it in the wrong address bar.

Please note that you must type an IP address in the browser's URL bar, not the search bar.

Type: where you enter the URL of the Web site normally, and then press ENTER.

This should load the router home page. router IP address

A very common error made by new users is to exclude one or more of the full IP address stops. Another is to use "L" instead of "1" or "O" instead of "0".

To get any help with login and setup of your router,
Kindly contact our experts on our toll-free number or via chat services.


supportmywifiext.net is an independent service and content provider. it does not affiliate any brand and also not promote any brand, product or software. The product we offer may available on brand owner’s website. we does not provide and outside link. if you find any outside link, please inform us, we will remove it. we are not responsible for any outside link or content. Read more.

mywifiext.net footer

Talk to Experts:


Request A Call Back